2012-07-27 OSLON Black Series Datasheet Version 1.0 LY H9GP OSLON Black Series combines thermal stability with high performance and reliability in a compact black package. It has a metal lead frame and a tried and tested lens design. The LED can be used wherever there are large fluctuations in temperature and a large amount of light is needed from a small area. Die OSLON Black Series vereint Temperaturstabilitat mit hoher Leistung und Zuverlassigkeit in einem kompakten, schwarzen Gehause. Sie hat ein Metall-Leadframe und profitiert vom bewahrten Linsendesign. Eingesetzt werden kann die LED uberall dort, wo groe Temperaturschwankungen herrschen und viel Licht aus kleiner Flache benotigt wird. Features: Besondere Merkmale: * Package: SMD epoxy package with silicone lens * Gehausetyp: SMD Epoxyd Gehause mit Silikonlinse * Technologie: InGaAlP Thinfilm * Abstrahlwinkel bei 50 % IV: (typ.) 90 * Farbe: gelb (590 nm) * ESD - Festigkeit: 8 kV nach JESD22-A114-F * * * * Technology: InGaAlP Thinfilm Viewing angle at 50 % IV: (typ.) 90 Color: yellow (590 nm) ESD - withstand voltage: 8 kV acc. to JESD22-A114-F * Qualifications: The product qualification test plan is based on the guidelines of AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors. * Qualifikationen: Die Produktqualifikation wurde entsprechend der Richtlinie AEC-Q101-REV-C, Stress Test Qualification for Automotive Grade Discrete Semiconductors", getestet. Applications * * * * * * Anwendungen Architectural Lighting indoor and outdoor Automotive Lighting Interior and Exterior Coupling into Light Guides Decorative Lighting Signal and Symbol Luminary Traffic Lights and Signaling 2012-07-27 * * * * * * 1 Architekturbeleuchtung innen und auen Automobilbeleuchtung innen und auen Einkopplung in Lichtleiter Dekorative Beleuchtung Signal- und Symbolleuchten Ampel- und Signalanlagen Version 1.0 LY H9GP Ordering Information Bestellinformation Type Luminous Flux 1) page 19 Ordering Code Typ Lichtstrom 1) Seite 19 Bestellnummer IF = 350 mA V [lm] LY H9GP-HZKX-36-1-350 Note: 39 ... 82 Q65111A1708 The above Type Numbers represent the order groups which include only a few brightness groups (see page for explanation). Only one group will be shipped on each packing unit (there will be no mixing of two groups on each packing unit). E. g. LY H9GP-HZKX-36-1-350 means that only one group HZ, JX, JY, JZ, KX will be shippable for any packing unit. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one packing unit. E. g. LY H9GP-HZKX-36-1-350 means that only one wavelength group 3,4,5,6 will be shippable. LY H9GP-HZKX-36-1-350 means that the device will be shipped within the specified limits as stated on page In order to ensure availability, single wavelength groups will not be orderable (see page for explanation). In a similar manner for colors where forward voltage groups are measured and binned, single forward voltage groups will be shipped on any packing unit. E. g. LY H9GP-HZKX-36-1-350 means that only one forward voltage group 9B,9C will be shippable. In order to ensure availability, single forward voltage groups will not be orderable (see page for explanation). Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Verpackungseinheit geliefert. Z. B. LY H9GP-HZKX-36-1-350 bedeutet, dass in einer Verpackungseinheit nur eine der Helligkeitsgruppen HZ, JX, JY, JZ, KX enhalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Wellenlangengruppe geliefert. Z. B. LY H9GP-HZKX-36-1-350 bedeutet, dass in einer Verpackungseinheit nur eine der Wellenlangengruppen 3,4,5,6 enthalten ist (siehe Seite fur nahere Informationen). LY H9GP-HZKX-36-1-350 bedeutet, dass das Bauteil innerhalb der auf Seite spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Gleiches gilt fur die LEDs, bei denen die Durchlassspannungsgruppen gemessen und gruppiert werden. Pro Verpackungseinheit wird nur eine Durchlassspannungsgruppe geliefert. Z. B. LY H9GP-HZKX-36-1-350 bedeutet, dass nach Durchlassspannungsgruppen gruppiert wird. In einer Verpackungseinheit ist nur eine der Durchlassspannungsgruppen 9B,9C enthalten (siehe Seite fur nahere Informationen). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Durchlassspannungsgruppen nicht direkt bestellt werden. 2012-07-27 2 Version 1.0 LY H9GP Maximum Ratings Grenzwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Operating temperature range Betriebstemperatur Top -40 ... 125 C Storage temperature range Lagertemperatur Tstg -40 ... 125 C Junction temperature for short time applications * Sperrschichttemperatur fur Kurzzeitanwendung * Tj (+) 175 C Junction Temperature Sperrschichttemperatur Tj 150 C Forward current Durchlassstrom (TS = 25 C) IF 100 ... 1000 mA Surge current Stostrom (t <= 10 s; D = 0.016; TS = 25 C) IFM 2500 mA Reverse voltage Sperrspannung (TS = 25 C) VR not designed for reverse operation V Note: *The LED chip exhibits excellent performance but slight package discoloration occurs at highest temperatures. Exemplary median lifetime for Tj = 175C is 100h. Anm: *Auch bei hochsten Temperaturen zeigt der LED Chip sehr gute Leistungsmerkmale, aber es kann eine leichte Verfarbung des Gehauses auftreten. Die mittlere Lebensdauer bei Tj = 175C betragt 100h. 2012-07-27 3 Version 1.0 LY H9GP Characteristics (TS = 25 C; IF = 350 mA) Kennwerte Parameter Symbol Values Unit Bezeichnung Symbol Werte Einheit Wavelength at peak emission Wellenlange d. emittierten Lichtes (typ.) peak 597 nm Dominant Wavelength 2) page 19 Dominantwellenlange 2) Seite 19 (min.) (typ.) (max.) dom dom dom 583 590 595 nm nm nm Spectral bandwidth at 50% Irel max Spektrale Bandbreite b. 50% Irel max (typ.) 18 nm Viewing angle at 50 % IV Abstrahlwinkel bei 50 % IV (typ.) 2 90 Forward voltage 3) page 19 Durchlassspannung 3) Seite 19 (min.) (typ.) (max.) VF VF VF 2.05 2.25 2.65 V V V IR not designed for reverse operation Reverse current Sperrstrom Real thermal resistance junction / solder point 4) page 19 Realer Warmewiderstand Sperrschicht / Lotpad (typ.) (max.) 4) Seite 19 2012-07-27 4 Rth JS real Rth JS real 6.5 11 K/W K/W Version 1.0 LY H9GP Brightness Groups Helligkeits-Gruppierungsschema Group Luminous Flux Luminous Flux 1) page 19 Gruppe Lichtstrom 1) page 19 1) Seite 19 Lichtstrom 1) Seite 19 Luminous Intensity 5) page 19 Lichtstarke 5) Seite 19 (min.) V [mlm] (max.) V [mlm] (typ.) IV [mcd] HZ 39000 45000 20700 JX 45000 52000 23800 JY 52000 61000 27800 JZ 61000 71000 32500 KX 71000 82000 37600 Note: The standard shipping format for serial types includes either a lower family group, an upper family group or a grouping of all individual brightness groups of only a few brightness groups. Individual brightness groups cannot be ordered. Anm.: Die Standardlieferform von Serientypen beinhaltet entweder eine untere Familiengruppe, eine obere Familiengruppe oder eine Sammelgruppe, die aus nur wenigen Helligkeitsgruppen bestehen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Forward Voltage Groups 3) page 19 Durchlassspannungsgruppe 3) Seite 19 Group Gruppe (min.) VF [V] (max.) VF [V] 9B 2.05 2.35 9C 2.35 2.65 Dominant Wavelength Groups 2) page 19 Dominant Wellenlangengruppen 2) Seite 19 Group yellow Gruppe (min.) dom [nm] (max.) dom [nm] 3 583 586 4 586 589 5 589 592 6 592 595 Note: No packing unit / tape ever contains more than one color group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Farbe enthalten. 2012-07-27 5 Version 1.0 LY H9GP Group Name on Label Gruppenbezeichnung auf Etikett Example: HZ-3-9B Beispiel: HZ-3-9B Brightness Helligkeit Wavelength Wellenlange Forward Voltage Durchlassspannung HZ 3 9B Note: No packing unit / tape ever contains more than one group for each selection. Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. 2012-07-27 6 Version 1.0 LY H9GP Relative Spectral Emission - V() = Standard eye response curve 5) page 19 , 1) page 19 Relative spektrale Emission - V() = spektrale Augenempfindlichkeit 5) Seite 19 , 1) Seite 19 rel = f (); TS = 25 C; IF = 350 mA OHL11701 100 % V 80 V 60 yellow amber red 40 20 0 400 450 500 550 600 650 nm 700 Radiation Characteristics 5) page 19 Abstrahlcharakteristik 5) Seite 19 Irel = f (); TS = 25 C 40 30 20 10 0 OHL04470 1.0 50 0.8 60 0.6 70 0.4 80 0.2 0 90 100 2012-07-27 1.0 0.8 0.6 0.4 0 7 20 40 60 80 100 120 Version 1.0 LY H9GP Forward Current 5) page 19 Durchlassstrom 5) Seite 19 Relative Luminous Flux 5) page 19 , 6) page 19 Relativer Lichtstrom 5) Seite 19 , 6) Seite 19 IF = f (VF); TS = 25 C 1000 mA V/V(350 mA) = f(IF); TS = 25 C OHL04413 OHL04567 2.5 V IF V (350 mA) 800 2.0 700 600 1.5 500 400 1.0 300 200 0.5 100 0 1.6 1.8 2.0 2.2 2.4 2.6 0 V 3.0 VF 2012-07-27 200 400 600 mA 1000 IF 8 Version 1.0 LY H9GP Relative Forward Voltage 5) page 19 Relative Vorwartsspannung 5) Seite 19 Relative Luminous Flux 5) page 19 Relative Lichtstrom 5) Seite 19 VF = VF - VF(25C) = f(Tj); IF = 350 mA V/V(25 C) = f(Tj); IF = 350 mA OHL04418 0.20 V OHL14421 2.5 V VF V (25 C) 2.0 0.10 1.5 0.05 0 1.0 -0.05 0.5 -0.10 -0.15 -40 -20 0 20 40 60 80 0 -40 -20 0 C 120 Tj dom = dom - dom (25 C) = f(Tj); IF = 350 mA OHL04424 dom 10 5 0 -5 -10 -40 -20 0 20 40 60 80 C 120 Tj 2012-07-27 C 120 Tj Dominant Wavelength 5) page 19 Dominante Wellenlange 5) Seite 19 15 nm 20 40 60 80 9 Version 1.0 LY H9GP Max. Permissible Forward Current Maximal zulassiger Durchlassstrom IF = f (T) IF OHL04484 1.1 A 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 Do not use current below 100 mA 0 0 20 40 60 80 100 C 140 TS Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) Permissible Pulse Handling Capability Zulassige Impulsbelastbarkeit IF = f(tp) D: Duty cycle, TS = 25 C 2.6 A IF 2.4 D: Duty cycle, TS = 85 C OHL04374 t D = TP 2.6 A IF 2.4 tP IF T 2.2 2.0 1.8 1.6 1.4 1.2 OHL04374 t D = TP tP IF T 2.2 2.0 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 1.8 1.6 1.4 1.2 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 1.0 1.0 0.8 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0.8 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2012-07-27 tp 10 Version 1.0 LY H9GP Package Outline 7) page 19 Mazeichnung 7) Seite 19 Approximate Weight: 26 mg Gewicht: 26 mg Mark: Cathode Markierung: Kathode ESD information: LED is protected by ESD device which is connected in parallel to LED-Chip. ESD Information: Die LED enthalt ein ESD-Bauteil, das parallel zum Chip geschalten ist. 2012-07-27 11 Version 1.0 LY H9GP Recommended Solder Pad 7) page 19 Empfohlenes Lotpaddesign 7) Seite 19 Reflow soldering Reflow-Loten Notes: In case the PCB layout of the application is intended to be used with other OSLON derivates or in future developed OSLON derivates, the heat sink must not be electrically connected to anode- or cathode solder pad because of possilbe chip inverted polarity. Anmerkungen: 2012-07-27 Sollte das Leiterplattenlayout auch fur weitere OSLON Derivate oder zukunftige OSLON Derivate einsetzbar sein, muss die Warmesenke auf der Leiterplatte elektrisch gegen den Anoden- und Kathodenanschluss isoliert sein, um Varianten mit invertiertem Chip einsetzen zu konnen. 12 Version 1.0 LY H9GP Reflow Soldering Profile Reflow Lotprofil Preconditioning: JEDEC Level 2 acc. to J-STD-020D.01 OHA04525 300 C T 250 Tp 245 C 240 C tP 217 C 200 tL 150 tS 100 50 25 C 0 0 50 100 150 200 s 300 250 t OHA04612 Profil-Charakteristik Profile Feature Symbol Symbol Pb-Free (SnAgCu) Assembly Minimum Ramp-up Rate to Preheat*) 25 C to 150 C Time tS TSmin to TSmax tS 60 Ramp-up Rate to Peak*) TSmax to TP Recommendation Maximum 2 3 100 120 2 3 Einheit Unit K/s s K/s Liquidus Temperature TL 217 Time above Liquidus temperature tL 80 100 s Peak Temperature TP 245 260 C Time within 5 C of the specified peak temperature TP - 5 K tP 20 30 s 3 6 K/s 10 Ramp-down Rate* TP to 100 C 480 Time 25 C to TP All temperatures refer to the center of the package, measured on the top of the component * slope calculation DT/Dt: Dt max. 5 s; fulfillment for the whole T-range 2012-07-27 C 13 s Version 1.0 LY H9GP Method of Taping 7) page 19 Gurtung 7) Seite 19 2012-07-27 14 Version 1.0 LY H9GP Tape and Reel Gurtverpackung 8 mm tape with 600 pcs. on 180 mm reel, 3000 pcs. on 330 mm reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 8 +0.3/-0.1 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) or 4 0.1 (0.157 0.004) 2 0.05 (0.079 0.002) 1.5 0.1 (0.059 + 0.004) 1.75 0.1 (0.069 0.004) 3.5 0.05 (0.217 0.002) Reel dimensions in mm (inch) Reel dimensions in mm (inch) A W Nmin W1 W2max 180 (7) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) Reel dimensions in mm (inch) A W Nmin W1 W2max 330 (13) 8 (0.315) 60 (2.362) 8.4 + 2 (0.331 + 0.079) 14.4 (0.567) 2012-07-27 15 Version 1.0 LY H9GP Barcode-Product-Label (BPL) Barcode-Produkt-Etikett (BPL) OSRAM Opto BIN1: XX-XX-X-XXX-X LX XXXX Semiconductors RoHS Compliant (6P) BATCH NO: 1234567890 ML Temp ST 2 260 C R (1T) LOT NO: 1234567890 (9D) D/C: 1234 Pack: R18 DEMY 022 B_R999_1880.1642 R (X) PROD NO: 123456789(Q)QTY: 9999 (G) GROUP: XX-XX-X-X OHA04563 Dry Packing Process and Materials Trockenverpackung und Materialien Moisture-sensitive label or print L VE LE l k, see labe code blan If bar ). (RH . RH idity hum 0% e tive C/6 red kag S rela 30 s pac _ < infra IVE of TOR rs tain 90% to ak SIT rs < ns ed (pe UC e). or rs con Hou SEN rs Hou ND and ject ditio cod C, 72 sing Hou e 5 bag E 48 C sub Hou con s UR ICO ces 24 6 dat 40 be time C ory ThiISTSEM r pro < time r 23 time at t will C). l with fact r ent MO . Floo time TO at at r Floo l ths tha tica d ival ure OP Floo 4 if: rea w Floo labe mon iden 5 ced equ el ices g, n e 5a is el belo or 24 pro 6 Lev e dev : ntin el whe cod e , w, e Lev el see e bag Lev l dat mou bak bar ned stur e Lev reflo 10% led stur e time sea for ore> ope e Moi r see stur k, is . sea is has k, Moi stur bef d 033 Moi in Floo RH blan Moi or-p blan in bag Car ing, r TD(if life . If r lf J-S thisvapp. d with 10%bak or Yea _ eks rs < r w, icat met 1 Yea tem d, She at nte uire not > y 1 WeHou DEC Afte Ind 4 uire reflo is bod Mou red req /JE time 168 req : 2b r a) Sto ices idity time is IPC r or time b) ned Floo r Hum ing ce time Dev 2a e r Floo a) ope 3. b) bakren Floo 1 l dat Floo If 2 refe time el 4. 2a el sea 3 Lev el and e Lev el Bag e e Lev stur e Lev Dat stur e Moi stur Moi stur Moi Moi C 1. U A TI Barcode label N O O S R A M 2. Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Note: Moisture-sensitive product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte. Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. 2012-07-27 16 Version 1.0 LY H9GP Transportation Packing and Materials Kartonverpackung und Materialien Barcode label MY DE 8 Q- 1 R1 lti LS TO Y T6 PL 76 1+ Mu POU GR 44 D/C ) (9D 4 20 23 Y: QT H1 TC BA 3G ) : 12 (6P 00 : 01 998 021 210 O Se SR mi AM co nd O uc pt to o H rs NO : ). 5 14 2 110 0 (X) PR OD NO : (1T ) LO T NO see labe (G) l k, N O TI U A C (Q) L VE LE code (RH blan If y bar . idit RH hum 60% e tive d C/ kag rela are 30 E S s _ < infr pac OR of tainITIV 90% to ak urs CT < e). or urs ted (pe ons con NS Ho g urs SE DU Ho and jec diti cod C, 72 sin Ho urs e 5 bag E ON 48 C sub e Ho con s UR ces 24 6 dat e MIC 40 be tim C e ThiISTSE pro < tory tim . or t with 23 tim e at t will C) or fac MO . Flo al len tim TO s at or at Flo d or iva ure el nth s tha OP ntic Flo 4 if: rea Flo , lab ow mo ice equ ide 5 ced el e 5a is el ingen bel or 24 pro 6 Lev e dev, : el cod e , unt wh Lev el re ow see bag Lev l dat re mo bak e bar ned Lev refl istu 10% re tim sea for istu ore> re ope e Mo see 3 istu is or . sea is has Mo nk, bef istu nk, Flo , rd -03 Mo in RH bla Mo or-p bla in bag ingCa r TD life (if If with t. r lf vapp. 10%baktor J-S this Yea , _ eks < r ed ica med, C 1 urs Yea tem She ow at uire not > y 1 WeHo unt DE Afte Ind 1. e 4 uire refl red req 2. bod Mo e ity is /JE tim s 168 req : e 2b a) Sto tim or mid is IPC tim e vice or b) or ned Flo Hu tim ing ce or De e 2a Flo a) ope or 3. b) bakren Flo e 1 l dat Flo If 2 el refe tim 2a 4. el sea 3 Lev el and Lev el re Bag te Lev re Lev istu Da re istu re Mo istu Mo istu Mo Mo P: Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Tem 2a 220 3 240 p ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: Barcode label MY DE 8 1 Q- R1 lti LS TO Y T6 PL 76 1+ P- Mu 8 : 01 O SR AM 99 D/C ) 21 00 (9D 21 : 4 20 00 Y: O H1 23 TC ) (6P (Q) (X) PR OD NO : (1T ) 11 00 LO T 14 2 NO 5 : 12 BA 3G QT Se SR m A ico M nd O uc pt to o H rs NO 44 (G) GR OU P: Muster ED Bin Bin 1: Bin 2: P-1 3: Q-1 -20 ML -20 2 Te 2a 220 mp 3 240 ST Ad 260 C R C R0 diti R ona C RT PA 77 l TE CK VA XT R: led Packing Sealing label OHA02044 Dimensions of transportation box in mm (inch) Width / Breite Length / Lange Height / Hohe 200 5 (7,874 0,196) 352 5 (13,858 0,196) 195 5 (7,677 0,1968) 352 5 (13,858 0,196) 30 5 (1,181 0,196) 33 5 (1,299 0,196) Notes Hinweise The evaluation of eye safety occurs according to the standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Within the risk grouping system of this CIE standard, the LED specified in this data sheet fall into the class Exempt group (exposure time 10000 s). Under real circumstances (for exposure time, eye pupils, observation distance), it is assumed that no endangerment to the eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light sources have a high secondary exposure potential due to their blinding effect. As is also true when viewing other bright light sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irritation, annoyance, visual impairment, and even accidents, depending on the situation. Die Bewertung der Augensicherheit erfolgt nach dem Standard IEC 62471:2006 ("photobiological safety of lamps and lamp systems"). Im Risikogruppensystem dieser CIE- Norm erfullen die in diesem Datenblatt angegebenen LEDs folgende Gruppenanforderung - Exempt group (Expositionsdauer 10000 s). Unter realen Umstanden (fur Expositionsdauer, Augenpupille, Betrachtungsabstand) geht damit von diesen Bauelementen keinerlei Augengefahrdung aus. Grundsatzlich sollte jedoch erwahnt werden, dass intensive Lichtquellen durch ihre Blendwirkung ein hohes sekundares Gefahrenpotenzial besitzen. Nach einem Blick in eine helle Lichtquelle (z.B. Autoscheinwerfer), kann ein temporar eingeschranktes Sehvermogen oder auch Nachbilder zu Irritationen, Belastigungen, Beeintrachtigungen oder sogar Unfallen fuhren. 2012-07-27 17 Version 1.0 LY H9GP Disclaimer Disclaimer Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components* may only be used in life-support devices** or systems with the express written approval of OSRAM OS. Bitte beachten! Lieferbedingungen und Anderungen im Design vorbehalten. Aufgrund technischer Anforderungen konnen die Bauteile Gefahrstoffe enthalten. Fur weitere Informationen zu gewunschten Bauteilen, wenden Sie sich bitte an unseren Vertrieb.Falls Sie diese Datenblatt ausgedruckt oder heruntergeladen haben, finden Sie die aktuellste Version im Internet. Verpackung Benutzen Sie bitte die Ihnen bekannten Recyclingwege. Wenn diese nicht bekannt sein sollten, wenden Sie sich bitte an das nachstgelegene Vertriebsburo. Wir nehmen das Verpackungsmaterial zuruck, falls dies vereinbart wurde und das Material sortiert ist. Sie tragen die Transportkosten. Fur Verpackungsmaterial, das unsortiert an uns zuruckgeschickt wird oder das wir nicht annehmen mussen, stellen wir Ihnen die anfallenden Kosten in Rechnung. Bauteile, die in lebenserhaltenden Apparaten und Systemen eingesetzt werden, mussen fur diese Zwecke ausdrucklich zugelassen sein! Kritische Bauteile* durfen in lebenserhaltenden Apparaten und Systemen nur dann eingesetzt werden, wenn ein schriftliches Einverstandnis von OSRAM OS vorliegt. *) A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. **) Life support devices or systems are intended(a) to be implanted in the human body,or(b) to support and/or maintain and sustain human life.If they fail, it is reasonable to assume that the health and the life of the user may be endangered. *) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. **) Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls Sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 2012-07-27 18 Version 1.0 LY H9GP Glossary Glossar 1) Brightness: Brightness values are measured during a current pulse of typical 25 ms, with an internal reproducibility of +/- 8 % and an expanded uncertainty of +/- 11 % (acc. to GUM with a coverage factor of k = 3). 1) Helligkeit: Helligkeitswerte werden wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von +/- 8 % und einer erweiterten Messunsicherheit von +/- 11 % gemessen (gema GUM mit Erweiterungsfaktor k = 3). 2) Wavelength: The wavelength is measured at a current pulse of typical 25 ms, with an internal reproducibility of 0,5 nm and an expanded uncertainty of 1 nm (acc. to GUM with a coverage factor of k=3). 2) Wellenlange: Die Wellenlage wird wahrend eines Strompulses einer typischen Dauer von 25 ms, mit einer internen Reproduzierbarkeit von 0,5 nm und einer erweiterten Messunsicherheit von 1 nm gemessen (gema GUM mit Erweiterungsfaktor k=3). 3) Forward Voltage: The forward voltage is measured during a current pulse of typical 8 ms, with an internal reproducibility of +/- 0,05 V and an expanded uncertainty of +/- 0,1 V (acc. to GUM with a coverage factor of k=3). 3) Durchlassspannung: Vorwartsspannungen werden wahrend eines Strompulses einer typischen Dauer von 8 ms, mit einer internen Reproduzierbarkeit von +/- 0,05 V und einer erweiterten Messunsicherheit von +/- 0,1 V gemessen (gema GUM mit Erweiterungsfaktor k=3). 4) Thermal Resistance: Rth max based on statistic values (6o) 4) Warmewiderstand: Rth statistischen Werten (6o) 5) Typical Values: Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. 5) Typische Werte: Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 6) Relative Brightness Curve: In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. 6) Relative Helligkeitskurve: Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. 7) Tolerance of Measure: Dimensions are specified as follows: mm (inch). 7) Matoleranz: Mae angegeben: mm (inch). 2012-07-27 19 max werden basiert wie auf folgt Version 1.0 LY H9GP Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2012-07-27 20 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Osram Opto Semiconductor: LY H9GP-HZKX-36-1-Z LY H9GP-HZKX-36